Need a consultation?
Leave your contact details and we will contact you soon.
Stainless steel 254SMO / EN 1.4547 Nickel alloy 254SMO / 1.4547 is a super austenitic molybdenum alloy stainless steel that is highly resistant to corrosion. According to this indicator, nickel alloys are significantly superior to ordinary stainless steels. Special properties Steel 254SMO / 1.4547 successfully resists crevice and pitting corrosion, halides in an acidic environment, […]
Stainless steel 254SMO / EN 1.4547
Nickel alloy 254SMO / 1.4547 is a super austenitic molybdenum alloy stainless steel that is highly resistant to corrosion. According to this indicator, nickel alloys are significantly superior to ordinary stainless steels.
Special properties
Steel 254SMO / 1.4547 successfully resists crevice and pitting corrosion, halides in an acidic environment, resistant to chlorides and concentrated acids. The dynamic sales of stainless steel of this grade are also explained by good weldability, ease of forming and lack of magnetic properties. The maximum temperature of use is 400 degrees.
Applications
Given the unique properties of the alloy, which performs well in the most difficult conditions, buy sheet stainless steel, or pipes, can be used in welded structures, pipelines, heat exchangers operating in salt water, for example, on desalination plants or offshore platforms. It is also used for the manufacture of equipment for the pulp and paper and oil and gas industries, the chemical industry, flue gas cleaning, containers for the storage and production of aggressive liquids.
Chemical composition of steel 1.4547
|
С |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Cu |
N |
Fe |
|
<0.02 |
<0.7 |
<1,0 |
<0.03 |
<0.01 |
19.5-20.5 |
17.5-18.5 |
6, 0-7.0 |
0.5-1.0 |
0.18-0.25 |
Other |
Mechanical material properties 1.4547
|
+AT |
||
|
Yield strength, min., ReH, MPa |
300 |
|
|
Tensile strength (tensile strength), min., Rm, MPa |
650-850 |
|
|
Relative elongation, min., % |
Longitudinal Patterns |
35 |
|
Cross Patterns |
30 |
|
|
Work impact KV at 20°C, min., J |
Longitudinal specimens |
100 |
|
Cross Patterns |
60 |
|
|
Impact work KV at -196°С -320° F , min., J |
Cross Patterns |
60 |
Alloy 254SMO / EN 1.4547 delivery forms
| Wheel 254SMO / EN 1.4547 |
Diameter 4-300mm |
| Sheet 254SMO / EN 1.4547 |
Thickness 0.5-20mm |
| Tape 254SMO / EN 1.4547 |
Thickness 0.2-2mm |
| Band 254SMO / EN 1.4547 |
Thickness 10-50mm |
| Wire 254SMO / EN 1.4547 |
Diameter 0.5-9mm |
| Pipe 254SMO / EN 1.4547 |
– Hot-rolled round pipe with a diameter of 38 to 244.5 mm, thickness from 3 to 25 mm -Cold drawn round pipe Diameter 6 to 219.1mm Thickness 0.9 to 14.2mm |
There are no reviews yet.