Need a consultation?
Leave your contact details and we will contact you soon.
Steel sheet S275NL / 1.0491 <tdcolspan=”5″> Forms of delivery of steel S275NL in sheets</tdcolspan=”5″><tdcolspan=”3″> Dimensions [mm]</tdcolspan=”3″> Steel grade Certification Thickness Width Length to S275NL/ 1.0491 3.1 acc. to EN 10204, AD 2000 W1 5 – 130 1000 – 4000 16000 ; Steel sheet S 275NL DIN EN 10025-3 Steel sheet, grade S 275NL, produced according to European […]
<tdcolspan=”5″>
Forms of delivery of steel S275NL in sheets</tdcolspan=”5″><tdcolspan=”3″>
Dimensions [mm]</tdcolspan=”3″>
| Steel grade | Certification | Thickness | Width | Length to | S275NL/ 1.0491 | 3.1 acc. to EN 10204, AD 2000 W1 | 5 – 130 | 1000 – 4000 | 16000 ; |
Steel sheet S 275NL DIN EN 10025-3
Steel sheet, grade S 275NL, produced according to European standard 10025-3, is a hot-rolled normalized fine-grained steel of ordinary quality.
Steel is normalized when it is heated, during rolling, up to 900 degrees, with further exposure, at the same temperature, and natural cooling.
This contributes to the formation of a finer-grained and homogeneous structure, as well as improving mechanical properties, eliminating internal stresses and imparting special hardness to the metal.
Special Properties
For this brand of sheet metal, the price is fully consistent with its characteristics, determined by:
– yield strength 275 megapascals, at ambient temperature;
– the minimum impact strength, reaching 27 joules, at a temperature of -50 degrees;
– with a density of 7.85 grams per cubic centimeter;
– good weldability, both with and without heating.
Areas of application
Sheet metal can be bought for further production of shaped rolled products used as elements of various welded structures in industrial and civil construction.
Chemical composition S275NL (1.0491): EN 10025-3-2004
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | CEV | max 0.16 | max 0.4 | 0.5 – 1.5 | max 0.3 | max 0.025 | max 0.02 | max 0.3 | max 0.1 | max 0.05 | max 0.015 | max 0.05 | max 0.05 | max 0.02 | max 0.55 | max 0.42 |
Mechanical properties S275NL (1.0491)
<tdcolspan=”2″>
to 100<tdcolspan=”6″>
100 – 200<tdcolspan=”2″>
200 – 250</tdcolspan=”2″></tdcolspan=”6″></tdcolspan=”2″><tdcolspan=”2″>
370-510<tdcolspan=”6″>
350-480<tdcolspan=”2″>
350-480</tdcolspan=”2″></tdcolspan=”6″></tdcolspan=”2″><tdcolspan=”2″>
63 – 80<tdcolspan=”2″>
80 – 100
100 – 150
150 – 200
200 – 250
</tdcolspan=”2″></tdcolspan=”2″><tdcolspan=”2″>
245<tdcolspan=”2″>
235
225
215
205
</tdcolspan=”2″></tdcolspan=”2″><tdcolspan=”2″>
-10°
51<tdcolspan=”2″>
-20°
47<tdcolspan=”2″>
-30°
40
-40°
31
-50°
27
</tdcolspan=”2″></tdcolspan=”2″></tdcolspan=”2″>
| Nominal thickness (mm): | Rm – Tensile strength (MPa) Flat and long products | Nominal thickness (mm): | to 16 | 16 – 40 | 40 – 63 | ReH – Minimum yield strength (MPa) | 275 | 265 | 255 | KV – Impact energy (J) longitud., (+N) | +20° 63 |
0° 55 |
<tdcolspan=”2″>
-10°
30<tdcolspan=”2″>
-20°
27<tdcolspan=”2″>
-30°
23<tdcolspan=”2″>
-40°
20
-50°
</tdcolspan=”2″></tdcolspan=”2″></tdcolspan=”2″></tdcolspan=”2″>
| KV – Impact energy (J) transverse, (+N) | +20° 40 |
0° 34 |
There are no reviews yet.